How to calculate hours between two times
- Enter the start and end time. The result updates as you type, so a typo shows immediately.
- If you took an unpaid break, put the minutes in the break field. Only paid time is affected; the elapsed duration stays as it is.
- Read the decimal hours. That is the number a timesheet or payroll system expects.
- For the reverse question, switch to the add mode, choose a start time and add the hours and minutes you will work.
Minutes, decimals and the classic timesheet mistake
Payroll systems usually want hours as a decimal, not as “7 h 45 min”. The conversion is simple but easy to get wrong: divide the minutes by 60. 15 minutes is 0.25, 30 is 0.5, 45 is 0.75. 7 hours 45 minutes is therefore 7.75 hours, not 7.45. Mistyping 7.45 underpays the employee by 18 minutes, and it happens constantly.
The table below covers the quarters, which is where most confusion lives:
| Minutes | Decimal | Minutes | Decimal |
|---|---|---|---|
| 5 | 0.08 | 35 | 0.58 |
| 10 | 0.17 | 40 | 0.67 |
| 15 | 0.25 | 45 | 0.75 |
| 20 | 0.33 | 50 | 0.83 |
| 25 | 0.42 | 55 | 0.92 |
| 30 | 0.50 | 60 | 1.00 |
If you need more precision than two decimals, divide the exact minutes by 60 and round at the end, not at each step. Adding rounded values for eight days compounds the error.
Breaks, unpaid time and paid hours
Elapsed time is not the same as paid time. A shift from 09:00 to 17:30 is nine and a half hours on the clock, but a 30-minute unpaid lunch leaves 8.5 paid hours. The break field subtracts from the total and shows the paid figure separately, so you can see both numbers. It does not change the end time, because the break happens inside the shift.
Some employers pay for breaks and some do not. The tool takes no position: enter 0 if the break is paid, enter the minutes if it is not. Overtime rules, shift differentials and rounding policies differ by employer and by law, and none of them are applied here.
Night shifts and the next-day problem
A shift that starts at 22:00 and ends at 06:00 is eight hours, but a naive subtraction gives minus sixteen. The tool treats an end time earlier than the start as the following day and says so in the result. That is the right reading for night shifts, early-morning deliveries and hospital rotas.
It also means a genuine data-entry error, such as 17:00 to 09:00, is treated as a 16-hour overnight shift rather than flagged as impossible. Check the overnight note if the answer looks surprising. For a shift longer than 24 hours, split it into two entries.
Adding a duration to a start time
The add mode answers a different question: not “how long was this?” but “when will it end?”. Start at 09:15, add 7 hours 45 minutes, and the answer is 17:00. The same rules apply: minutes roll into hours, hours roll past midnight, and the overnight note appears when the end lands on the next day.
This is useful for planning rather than payroll: working out a finish time around a fixed appointment, or checking whether a 6-hour drive plus two 45-minute stops still gets you there before dark.
Timesheet totals
To total a whole week, calculate each day with this page, copy the decimal hours, and add them in a spreadsheet. Adding decimals is safer than adding hours and minutes by hand, because the minutes column has to carry at 60 rather than 100. If your employer rounds to the nearest quarter hour, round each day first and total afterwards, which is the common policy and matches most payroll software.
If you need the hourly pay that goes with those hours, the hourly to salary calculator converts a rate into weekly, monthly and yearly figures.
Privacy
Times are read from the form and processed in the browser. Nothing is uploaded, there is no account, and the values are gone when you close the tab. The page works offline once loaded.
Questions people ask
How do I read the decimal hours?
Decimal hours are what timesheets and payroll systems want. 7 hours 30 minutes is 7.5 decimal hours, because 30 minutes is half of 60. 7 hours 45 minutes is 7.75. The page shows both so you can copy the decimal straight into a timesheet without converting by hand.
Why does 08:30 to 17:30 show 9 hours?
Because it is nine hours of elapsed time. If you take a 30-minute lunch break, enter 30 in the break field and the paid time becomes 8.5 hours. The tool does not assume a break; it reports what you give it.
What happens to a night shift?
An end time earlier than the start time is treated as the next day. 22:00 to 06:00 gives 8 hours and marks the shift as overnight. This is the normal reading for shift work, and it avoids a negative answer.
Can I add several durations together?
Use the add mode repeatedly, or paste a list into a spreadsheet. This page adds one duration to a start time, which is enough to answer “what time do I finish if I start at 09:15 and work 7 hours 45 minutes?”.
Does it handle 12-hour and 24-hour input?
Yes. Type 09:30 or 9:30 pm. The field accepts either, and the result is shown in 24-hour form. Mixing the two in one calculation is allowed as long as each field is unambiguous.
Why is the total in minutes sometimes off by one?
Times are rounded to whole minutes when the result is displayed. If you enter a duration with seconds, the seconds are rounded before the sum. For payroll, work in whole minutes and the figures will match your employer's system.
Is my schedule uploaded?
No. The times are read from the form and processed in the tab. Nothing is sent anywhere and nothing is stored after you close the page.
Updated · 28 Kartik 2083 BS